Side by Side Outlet Parts and Accessories
A cold air intake kit on the Textron Wildcat XX can greatly improve the performance of your vehicle. It is a pretty common practice that a vehicles first modification includes intake, exhaust, and ECU tune. Modifying the Textron with a cold air intake will flow more air than the factory intake by design. This is due to the newly enhanced intake from Agency Power that features a high flow air filter to provide more CFM when the Wildcat needs it most. The factory air box is designed to accommodate the stock power and the everyday Textron driver. Unlike the stock air box or those other flow tubes that just cut the stock air box open, a complete cold air intake is the proper way to gain power without restriction. An intake needs to breathe while filtering out particulates. By removing the Donaldson air box, you are gaining better air flow and dyno proven power even without an ECU flash.
The Agency Power cold air intake has been engineered to be a direct replacement for the factory Textron Wildcat XX intake. Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
After eliminating the heavy and bulky Donaldson filter and air box, the Agency Power intake features an aluminum intake tube that replaces the factory rubber tube. Each aluminum part is powder coated in a matte black for a clean and stylish finish. AP silicone coupler and clamps are included to make the kit an easy bolt-on.
To show the performance of the Agency Power intake, we tested a Textron Wildcat XX back to back keeping all the variables the same except for the intake. On a UTV with a stock tune, the intake made a bolt-on 5 horsepower. Making a simple 5 horsepower is tough to do on any of these UTV’s with bolt-on parts outside of the exhaust and ECU tune. This is because of the much improved air flow over the stock box. Overall, the intake is a great product to add as your first upgrade or during your build to improve power. The Agency Power Textron Wildcat XX Air Intake has been engineered to perfection!
Features:
- High Flow, Reusable Air Filter
- Aluminum Intake Tube
- Black powder coat finish
- Silicone Coupler With Clamps
- Simple Bolt On
- Gain of 5 hp
- Dyno proven results
Notes:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
- View Installation Instructions Here
Fitment:
- 2018+ Textron Wildcat XX
The Agency Power front bumper for the Honda Talon is designed to provide vehicle protection you want while keeping a great look to your UTV. The bumper consists of 1.5"x .095" wall steel tubing that has been digitally designed to flow with the Honda Talon rear shape. Each bumper features laser cut flanges and precision welds to ensure a perfect fit while maintaining quality. The bumper extends out and up providing necessary bracing to help protect you and your machine. All bumpers are Made in the USA designedspecifically for the Honda Talon 1000R or 1000X. Agency Power offers these bumpers in a Gloss Red or Gloss Black powdercoat to mesh with the stock Honda colorway. Whether you are racing, cruising the dunes, or trail riding, the Agency Power rear bumper is a great add-on for function and style.
Features:
- Increased Chassis Protection
- 1.5" X .095" Thick Tubing
- Follows Factory Styling
- Mild Steel for Durability and Sheer Strength
- Direct-Fit Bolt-On Installation
- Powder Coated for Durability
- Laser-Cut Agency Power Logo
- Weight 21.45 lbs
Fitment:
- Honda Talon 1000R 2019+
- Honda Talon 1000X 2019+
- Honda Talon 1000X-4 2019+
Notes:
The Agency Power front bumper for the Honda Talon is designed to provide vehicle protection you want while keeping a great look to your UTV. The bumper consists of 1.5"x .095" wall steel tubing that has been digitally designed to flow with the Honda Talon rear shape. Each bumper features laser cut flanges and precision welds to ensure a perfect fit while maintaining quality. The bumper extends out and up providing necessary bracing to help protect you and your machine. All bumpers are Made in the USA designedspecifically for the Honda Talon 1000R or 1000X. Agency Power offers these bumpers in a Gloss Red or Gloss Black powdercoat to mesh with the stock Honda colorway. Whether you are racing, cruising the dunes, or trail riding, the Agency Power rear bumper is a great add-on for function and style.
Features:
- Increased Chassis Protection
- 1.5" X .095" Thick Tubing
- Follows Factory Styling
- Mild Steel for Durability and Sheer Strength
- Direct-Fit Bolt-On Installation
- Powder Coated for Durability
- Laser-Cut Agency Power Logo
- Weight 21.45 lbs
Fitment:
- Honda Talon 1000R 2019+
- Honda Talon 1000X 2019+
- Honda Talon 1000X-4 2019+
Notes:
The Honda Talon can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! Since the Honda Talon uses a dual clutch transmission like a car, the potential of blowing belts from towing is not a concern. So for those that want the convenience of a tow hitch, Agency Power has this amazing new product. A tow hitch can be used to add a bike rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the Honda Talon even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch recepticle that can also be used for strapping down the Honda Talon or other uses.
The Agency Power Honda Talon Tow Hitch is all Made in the USA. It features 0.188 thick cold rolled steel plate that has been water jetted to our specific design. Each piece is precision welded and then finally powder coated in a gloss red or matte black finish.
Features:
- Acts as a gusset addsing rigidity to rear radius rod mounting points
- 2" ID receiver using 2.5" .238 wall square tube and has a 5/8 thru hole
- Plate is 0.188 thick cold rolled steel (11 gauge)
- Stylish design with Agency Power logo
- Made in the USA
- Powder coated 2 great colors for the Honda Talon
- Does not work with Agency Power rear bumper
The Agency Power rear bumper for the Honda Talon is designed to provide vehicle protection you want while keeping a great look to your UTV. The bumper consists of 1.5”x .095” wall steel tubing that has been digitally designed to flow with the Honda Talon rear shape. Each bumper features laser cut flanges and precision welds to ensure a perfect fit while maintaining quality. The bumper extends out and up providing necessary bracing to help protect you and your machine. All bumpers are Made in the USA designed specifically for the Honda Talon 1000R or 1000X. Agency Power offers these bumpers in a Gloss Red or Matte Black powdercoat to mesh with the stock Honda colorway. Whether you are racing, cruising the dunes, or trail riding, the Agency Power rear bumper is a great add-on for function and style.
Features:
- 1.5” X .095” thick tubing
- Follows factory styling
- Adds chassis protection
- Mild Steel for durability and sheer strength
- Powder coated for durability
- Laser-cut Agency Power logo
- Does not work with Agency Power hitch
Agency Power has developed one of the most versatile passenger grab bars ever made for the Honda Talon. It is designed with comfort and utility in mind. When removed, the grab bar can be used as a lug wrench to take your wheels off on the fly. Since some aftermarket wheels require different lug nuts or use a lug adapter, we have integrated a 17mm and 19mm socket on each side of the handles. Being 20 inches long to adjust in or out for your passenger, the T-handle also provides massive leverage so breaking loose lugs is effortless. With the thru-hole into the bar, you will be able to attach accessories like phone holders, action camera mount, thread on cup holders, and many other options. The functionality of this grab bar doesn't stop there though. On the bottom side is a bottle opener that eliminates the need for a separate keychain. Agency Power has opted to use ODI flanged grips for maximum comfort. This bar is available in gloss red or matte black powder coat finishes. With the laser cut AP badge stamped on the front, there is no doubt people will wonder where you got it from.
Features:
- Can be used as a lug wrench
- Thru-hole to use accessories
- Bottle Opener on the bottom
- ODI Flanged grips for comfort
- Powder Coated Gloss Red
Note:
- Accessories pictured not included.
Agency Power has developed one of the most versatile passenger grab bars ever made for the Honda Talon. It is designed with comfort and utility in mind. When removed, the grab bar can be used as a lug wrench to take your wheels off on the fly. Since some aftermarket wheels require different lug nuts or use a lug adapter, we have integrated a 17mm and 19mm socket on each side of the handles. Being 20 inches long to adjust in or out for your passenger, the T-handle also provides massive leverage so breaking loose lugs is effortless. With the thru-hole into the bar, you will be able to attach accessories like phone holders, action camera mount, thread on cup holders, and many other options. The functionality of this grab bar doesn't stop there though. On the bottom side is a bottle opener that eliminates the need for a separate keychain. Agency Power has opted to use ODI flanged grips for maximum comfort. This bar is available in gloss red or matte black powder coat finishes. With the laser cut AP badge stamped on the front, there is no doubt people will wonder where you got it from.
Features:
- Can be used as a lug wrench
- Thru-hole to use accessories
- Bottle Opener on the bottom
- ODI Flanged grips for comfort
- Powder Coated Matte Black
Note:
- Accessories pictured not included.
The Polaris RZR XP Turbo is one of the most popular SXS vehicles to modify in the UTV market. After you have done all the basic bolt-on modifications such as exhaust, intake, ECU flash, and clutching, the next biggest gain in horsepower is from doing a full turbo upgrade. The factory turbocharger performs well in the 925cc, 2 cylinder engine, however there is much more to gain. An upgraded turbocharger will flow more air, requiring less boost pressure to gain power. But when you do increase that boost, be ready for an amazing push of performance! For those that want the ultimate edge on their friends and competitors, a turbo upgrade is the only answer.
Agency Power has partnered with one of the leading turbo manufactures to offer this full bolt-on turbo upgrade for the Polaris RZR XP Turbo. What makes the Agency Power Turbo better than the competition is that this is a complete OEM replacement. This is not a compressor cover, wheel modification, core exchange, or anything else that some others have available. This is a full replacement turbo that is a direct fit to your factory parts. The factory oil lines, intake and inlet pipes, and exhaust parts all bolt up to this turbo so there is no need to get extra parts or replace many of the current modifications you might already have. Completely made in North America, the turbo features a full cast manifold, new adjustable wastegate, larger compressor and turbine wheel, along with an enhanced turbo housing finished in gloss red with the Agency Power logo.
Whether you are going to be trail riding, ripping the dunes, or even competing in the desert, the Agency Power upgraded turbocharger for the Polaris RZR XP Turbo is for you. This turbo can be used as a bolt-on replacement for the factory turbo or you can partner with your preferred tuner to unleash its full potential!
Specifications:
- OEM Turbo flows up to 0.16kg/s
- AP Turbo flows up to 0.21kg/s
- Airflow is increased by 31% over stock
- Compressor Wheel
- Inducer- 41mm
- Exducer- 51mm
- Turbine Wheel
- Inducer- 45mm
- Exducer- 40.4mm
Features:
- Bolt-on no modifications required to fit
- Powdercoated red compressor cover with AP logo
- Made in North America
- No Core required, keep or sell your OEM turbo
- More consistent torque curve
- Less dip in top end power band
- Stays in torque longer
- 40+ HP gain on pump gas with tuning and supporting mods
- 50+ HP gain on race gas with tuning and supporting mods
Notes:
- This is for the bolt-on turbocharger only. This does not include tuning or other supporting modifications.
- Recommended Parts for Installation:
- Exhaust System
- Blow Off Valve
- Silicone Intake and Turbo Inlet Pipes
- For maximum performance, bigger injectors should be used. This depends on your tuner
- Turbo Heat Blanket for K04 Size Turbo – Excessive Heat Can Occur
- Clutching
- AEM Wideband Failsafe Gauge to monitor boost and AFR – Not required, great add-on to monitor vitals.
- ECU Tuning – Absolutely required!
Fitment:
- 2016-2020 Polaris XP Turbo | XP4 Turbo
- 2019-2020 Polaris XP Turbo S | XP4 Turbo S
- OEM Replacement for Polaris Part Number 1205689
The Polaris RZR XP Turbo can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the RZR XP Turbo even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Polaris RZR XP Turbo or other uses.
The Agency Power Polaris RZR XP Turbo Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and Has a 5/8 Through Hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Gloss Red
- Made in the USA
Fitment:
- Polaris RZR XP Turbo 2016+
- Polaris RZR XP 4 Turbo 2016+
The Polaris RZR XP Turbo can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the RZR XP Turbo even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Polaris RZR XP Turbo or other uses.
The Agency Power Polaris RZR XP Turbo Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and Has a 5/8 Through Hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Satin Black
- Made in the USA
Fitment:
- Polaris RZR XP Turbo 2016+
- Polaris RZR XP 4 Turbo 2016+
Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.
Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.
The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.
Feautures:
- Spacers are 2-inches wide each
- 4x156 - M12x1.5 - 131mm hub bore
- Improves overall handling of your machine
- Increases the track width
- Provides more aggressive offset and stance
- Durable and light-weight aluminum construction
- Steel lug studs prevent seizing of lug nuts
- CNC machined for precision fitment
- Limited One-Year Warranty
Fitment:
- Polaris RZR 1000 (all)
- Polaris RZR 900 / S / XC 2015+
- Polaris RZR XP Turbo
- Polaris Ranger 900 (all)
- Polaris Ranger 1000 (all)
- Polaris General 1000 (all)
- Kawasaki Mule Pro (all)
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.
Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.
The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.
Feautures:
- Spacers are 2-inches wide each
- 4x156 - M12x1.5 - 131mm hub bore
- Improves overall handling of your machine
- Increases the track width
- Provides more aggressive offset and stance
- Durable and light-weight aluminum construction
- Steel lug studs prevent seizing of lug nuts
- CNC machined for precision fitment
- Limited One-Year Warranty
Fitment:
- Polaris RZR 1000 (all)
- Polaris RZR 900 / S / XC 2015+
- Polaris RZR XP Turbo
- Polaris Ranger 900 (all)
- Polaris Ranger 1000 (all)
- Polaris General 1000 (all)
- Kawasaki Mule Pro (all)
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
