Side by Side Outlet Parts and Accessories

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a set of 12 tri-wing bolts for the hat to hardware.

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a set of 12 tri-wing nuts for the hat to hardware.

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a replacement brake rotor hat.

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is the tool needed to take apart the rotor and hat tri-wing hardware.

• For Agency Power big brake kit only

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a replacement rotor for the front or rear left side.  The rotor reuses the aluminum hat and hardware.  The nuts on the 2 piece hardware can be reused up to 3 times.  Should you need the aluminum hat or hardware, please contact us.

• Left Side
• Front or Rear
• 12x.810"
• Vented, directional, slotted, drilled, zinc coated
• For big brake kit only
• Sold individually

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a replacement rotor for the front or rear right side

Can-Am X3 upgrades are endless, but making sure your power plant is operating at peak performance is always crucial to having a great time!  The large hose that connects from your intercooler to your throttle body is the Can-Am Maverick X3 charge tube also known as a boost tube.  There are several reasons why upgrading this tube is important.  The factory tube is rubber and when under pressure, this tube can expand.  Expansion of this tube can alter the pressure and efficiency.  When you are increasing boost pressure, it is common for the factory rubber boost tube to pop off leaving you dead in the dirt until you can reconnect the hose.  This is the same principles that we have applied for years in high performance turbocharged vehicles.

The silicone tube is 5mm thick or 4ply making it extremely strong compared to the OEM tube.  This newly designed boost tube is pressure tested to 85psi meaning it will never fail you for stock or extreme boosted vehicles.  To ensure a very secure system, we supply these boost tubes with high end T-bar clamps.  The upgraded boost tube is designed to work with stock or aftermarket intercoolers.  One main advantage of this tube is we have added a blow off valve port.  The blow off valve port allows you to add a blow off valve to the turbo system which helps alleviate boost pressure from the system when you get on and off the throttle. Any 1 inch flange blow off valve can work such as our own Agency Power vent to atmosphere kit.  Agency Power Boost Tubes come in Black Silicone with the Agency Power Logo.  This boost tube is designed specifically for the Can-Am X3 Turbo RR.

Kit Includes:

• 1 piece long silicone boost tube
• T-Bar Clamps
• Does NOT include blow off valve

Fitment:

• 2020+ Can-Am X3 Turbo RR

Kit Includes:

• 1 piece long silicone boost tube
• T-Bar Clamps
• BOV NOT Included

Fitment:

• Pre-Filter 5 1/2” Enclosed Top Tapers 6” Bottom x 5" Tall
• Agency Power Yamaha YXZ Supercharger Filter

Agency Power has teamed up with Outerwears to design Pre-filters for the Agency Power UTV filter line up. Pre-Filters are designed to enhance the efficiency of any performance or exposed air filter. Agency Power during the design of UTV intakes knew a Pre-Filter was going to be requested by owners. Rather than keep you guessing on what fits Agency Power decided to team up with the best in Outerwears. By giving them our unique filter sizes they were able to design Pre-Filters to fit tight and correctly on the filter. The 6 inch round x 12 inch tall was made to fit the Agency Power Polaris XP Turbo, XP 1000, 900S, 1000S Cold Air Intake Filter as well as the Textron Wildcat XX Intake.

The Pre-filter is constructed using Outwears proprietary polyester mesh with uniform micron openings and treated in an optional hydrophobic water-repellent process. The mesh is UV resistant and filters debris down to .005”.  The Pre-Filter is shatter proof in freezing temperatures and resistant to heat up to 450 degrees.

The mesh material is puncture resistant and has an elasticity characteristic which allows the threads to return to the original position if they have been impacted or shifted. The Outerwears manufacturing process incorporates a welded seam for strength and to reduce potential failure points in the material.  The top seam utilizes specialized thread and cording to reinforce durability of the top. Pre-filters are designed to deflect the damaging debris, which clogs air filters, compromising peak air-flow and horsepower. The Pre-filter also extends the time between filter servicing intervals reducing costs and increasing convenience for you. “Agency Power” logo printed onto the Pre-Filters.

Features:

• Proprietary Polyester Mesh
• Hydrophobic Water-Repellent Process
• UV Resistant
• Filters Debris Down to .005”
• Shatter Proof In Freezing Temperatures
• Resistant to Heat Up to 450 Degrees
• Puncture Resistant
• Elasticity Characteristics Allowing The Threads to Return to The Original Position
• Extends The Time Between Filter Servicing Intervals
• Made in USA
• Over 25 Years of Product Development
• Originally Developed For Off Road Applications
• Pre-Filter Custom Tailored for Agency Power Filters
• Sold As Pre-Filters Only NO Air Filters Included

Fitment:

• Pre-Filter 6" Diameter x 12" Tall With Enclosed Top
• Agency Power Polaris RZR 1000S Cold Air Intake Kit Filter
• Agency Power Polaris RZR 900S Cold Air Intake Kit Filter
• Agency Power Textron Wildcat XX Cold Air Intake Kit Filter

Fitment:

• Pre-Filter 4 ½” x 7” Oval Enclosed Top Tapers 5 ¾” x 9” Bottom x 4" Tall
• Agency Power Can-Am Maverick X3 Turbo Cold Air Intake Kit Filter