Side by Side Outlet Parts and Accessories
The Goal of Graves when designing this X3 exhaust system was to provide the best performing, highest quality product on the market. We did not compromise in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range.
- 5 HP / 5 Torque Power Increase (slighly less with sound insert)
- Sounds reducing insert included in kit (USDF/USDA approved spark arrester. Approved).
- Fuel injection system tuning not required
- Exhaust System Saves 16.8 lbs. over stock setup. (Stock 24.4 lbs / Graves 7.6 lbs) 69% WEIGHT SAVINGS OVER STOCK SETUP!
- Graves Cat Back with Insert @ IDLE 90.5 / DB at 3500 RPM 94.7
- Graves Cat Back No Insert @ IDLE 91.5 / DB at 3500 RPM 97.5
- Stock @ IDLE 78.5 / DB at 3500 RPM 87.2
Headers designed for the maximum power output Single Lambda sensor comes standard Constructed from Aerospace grade hi heat Titanium alloys Advanced welding process showcases laser perfection welds Long Tapers with Precision fitment and "butt" welds Spigots designed to allow the headers to float free without leaks Flanges are made from 7075 hard anodized aluminum. Built to last!
Exhaust System Saves 14.7 lbs. over stock setup. 83 db at Idle / 96.5 db at 4000 rpm Fitment: Yamaha YXZ 1000r (All) 2016 - 2019
Includes 1 Year of Service No Contracts No Monthly Fees Unlimited Tracking Hardwired Geo Fence Alerts Any Weather Conditions Easy Installation Off Road & Marine —Back-up Battery———— Tilt Alerts US, Mexico and Canada 4G Network 2.5 x 3.125 x 0.875 Only $20 Yearly Renewals
-These are made from a flexible and durable rubber compound.-Logo is 3D raised.-Chrome chain and keyring.
IN STOCK and ready to ship. Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl. For two seat models CLICK HERE.
We also carry the Polaris OEM upper doors HERE that don't require a zip/unzip.
IN STOCK and ready to ship. Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl. For four seat models CLICK HERE
Local Pickup Only
This is a full glass windshield – laminated 1/4 safety glass that is DOT approved (not stamped) surrounded my a sturdy steel frame. The bottom portion of each side flips open to allow air to flow underneath.
BUILT IN USA!
This is a full glass windshield - laminated 1/4 safety glass that is DOT approved (not stamped) surrounded my a sturdy steel frame. The bottom portion of each side flips open to allow air to flow underneath. BUILT IN USA!
Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl.,
Made of heavy duty ballistic material, snaps to attach, and marine grade zippers. These doors fit the CFmoto Zforce 1000 Z1000 with bottom filler panels. Windows can be fully unzipped and removed during the warmer season.
This heavy duty battery tray fits under the hood of your Maverick XD S (Turbo). It attaches to the frame with self-tapping screws provided making installation very easy, simple and fast. It is pictured with an Optima 34/78-980 Red Top battery (not included) you can use any 34/78 series battery. Also, included is battery lugs to adapt from a top post battery to a 5/16” stud.
- Fits: 2011-14 RZR 800, 2011-2014 RZR-S 800, 2011-2014 RZR XP900 and 2012-2018 RZR 570
- DOES NOT FIT: 2008-10 RZR, see this one instead.
Now, you can install a full size battery in your RZR. Fits under the drivers seat and replaces the small stock battery. Hold either a full size Optima or an Odyssey PC925 (Length 9-7/8 x Width 7-1/8 x High 6-1/2). Comes with two straps to secure either size battery. Also, comes with lugs to convert a battery lug to a marine type terminal.
Pictured with an Optima 34/78-980 Red top and an Odyssey PC925 (battery not included).
Just like the UTV-SBI-CK, this kit includes enough wiring to set up two batteries in close vicinity of one another. However, added to this kit is a voltmeter so you always know the state of charge for each battery. Adding a second battery vs putting in one large one is really the best way to go because it ensure you will never run the primary battery dead.
This kit includes enough wiring to set up two batteries in close vicinity of one another. Therefore, it works great for most RZR applications where you are putting a second battery under the same seat, or in the new X3 where you are putting it in the same battery box. Adding a second battery vs putting in one large one is really the best way to go because it ensure you will never run the primary battery dead.
Simple to install! Let this battery isolator take the worry from your mind by making sure you primary battery always has power! Wire all you accessories into the secondary battery and you will never again be left stranded with a machine that won't start! We have personally tested these TrueAm products for tens of thousands of offroad miles, and they keep on performing!
Take maintenance into your own hands! These wheel bearing grease tools allow you to perform a simple task list to keep your wheel bearings operating at peak performance:
Remove the wheel, remove the caliper, and take off the axle bolt. Insert grease tool and pump with grease. Reverse and move to next wheel, it really is that simple!
Choose your size needed below.
.
Convex Mirrors offer a custom billet look while working better than any mirror on the market. The low profile billet clamps will not interfere with most windshields. The extended reach design gets the mirror out far enough so you can actually see what is behind you. The slight convex glass design offers a wide view without over distorting the view. Mirrors will breakaway forward and backward to help prevent damage in case of contact with stationary objects.
*sold as pair
Made from powder coated 1/8" (.125) thick aluminum that will protect you from the elements for many years! Our Fast Back roofs have a low profile that only increase the height of the RZR by about 1/4". They also have a long rear spoiler that gives a fast back look as well as addition protection for passengers.
*Installs over stock plastic visor. Will work with any windshield that will fit on a stock machine (including fold down windshields).
Fits:
2014+ RZR XP4 1000
2015+ RZR 900 4
2016+ RZR XP TURBO 4 Seater
Made from powder coated 1/8" (.125) thick aluminum that will protect you from the elements for many years! Our Fast Back roofs have a low profile that only increase the height of the RZR by about 1/4". They also have a long rear spoiler that gives a fast back look as well as addition protection.
Sunroof is made from dark tint polycarbonate that will not break.
Fits:
2014+ RZR XP 1000 2 Seat 2016+ RZR XP TURBO 2 Seat Fits RZR 900 and 1000 S 2 Seat models if you leave the back spoiler piece off.
CLICKER HERE FOR 4 SEAT MODELS
.
We offer the absolute best aluminum roof for the Polaris General Models. Our custom roof clamps position the roof on top of the cage instead of in the channel to offer a better look and better protection by eliminating the gutter affect from having the roof sit down in the cage. Our roofs cover from the front edge of the stock visor to the back of the cage. Our 3 piece design allows us to ship these roofs for much less than most. The joints are sealed and do not leak. Sunroof is dark tinted polycarbonate that won't break and is sealed for leak resistance.
- 13" long automotive style blade
- 10" long wiper arm
- Manual operation
- Requires .5" hole for installation
Our 800 windshields may not fit with all roofs. Some modifications may be required depending on how the roof mounts. Available in a solid mount, or with a bottom portion that flips forward to allow fresh air in.
Fits: 2009-2018 RZR 570 2008-2014 RZR 800 (all models) 2011-2014 RZR XP 900 models
***Wipers sold separately. Click HERE
