Side by Side Outlet Parts and Accessories
FITS: 2 seater only '08-14 RZR 800/900, '08+ RZR 570 (except S Model)
OUR REAR WINDOW IS A FULL (TOP TO BOTTOM) CLEAR, STRONG REAR WINDOW. MOST OTHER MAKES OF RZR REAR WINDOWS ARE ONLY “SEE-THRU” FOR THE UPPER HALF. OUR REAR WINDOWS ARE COMPLETELY SEE-THRU FROM TOP TO BOTTOM.
FITS: '08-14 RZR 800/900, '08+ RZR 570
Scratch Resistant Half Windshield, Rubber Cushioned Stainless Steel Clamps and Hardware and Form Fitted Rubber Cushioned Hood Seal.
Includes all mounting hardware and rubber trim seal.
CAN be installed with or without Polaris door bag
They are made from 1/4″ tinted polycarbonate. Don’t be fooled, Polycarbonate is NOT plexiglass. Polycarbonate is virtually indestructible. It will bend before it breaks. This is the same material we manufacture our roofs and rear windows out of. And the doors are tinted all the way through the material. It is not a tinted film.
Our doors provide visibility, so you can see your front tires without opening your door, which is ideal for rock crawling! These upper panels provide protection from rocks and debris.
*NOTE* Installation does require you to drill (3) 3/8″ holes in the black plastic on the right side, above the key/switch location.
Polaris RS1 Tinted 1/4″ Polycarbonate Half Windshield. Comes with rubber liner stainless steel clamps, and all necessary stainless steel mounting hardware. Also, includes per-installed rubber bulb seal along bottom edge of windshield.
With our Tinted, UV Protected, 1/4″ thick Polycarbonate UTV Roof you can now see right through it and see what is above you and around you. Here is what you get. (1) A Tinted, Polycarbonate SEE THRU Roof (2) All the necessary Hardware to install the Roof (3) Installation Instructions (Very easy Installation).
This 2 Piece Windshield is designed to fit this Polaris ACE Model
2 Piece Lower & Upper Windshield / Rear Window With Storage Set-up For The Upper Windshield
Half Windshield, Rubber Cushioned Stainless Steel Clamps and Hardware and Form Fitted Rubber Cushioned Hood Seal.
INCLUDES: • Dual Nexus Jack Bar Mount • (2) Set screws • (1) Bar Mount Screw
Use a Rugged Radios Jack Mount to provide a convenient and accessible connection point on your dash, center console, or anyplace you prefer.
No more fumbling for hard to reach cables! Spend less time getting ready and just plug in and go!
Simply run the connection off the back of your intercom, behind the dash and secure into this jack mount.
Comes complete with hardware and set screw to secure jack in place.
For installation, drill a 1" hole.
Use a Rugged Radios Dual Jack Mount to provide a convenient and accessible connection point on your dash, center console, or anyplace you prefer.
No more fumbling for hard to reach cables! Spend less time getting ready and just plug in and go!
Offered in a Single, Dual, and Bar Mount version, the options are endless.
Simply run the connections off the back of your intercom, behind the dash and secure into this jack mount. Need shorter or longer cables from your intercom to the Jack Mount? Shop the #CS-OFF options.
Comes complete with hardware and set screw to secure jack in place.
Off-Road Plug for Nexus style jacks. Whenever you disconnect your helmet kit, use this plug to keep the female Nexus jack sealed against water, dirt, and debris.
Perfect for when you're out of the vehicle or washing out the weekend dust and dirt. Sold per each
Protect your investment and keep your comms in top working order!
- Secures microphone boom
- Strain-relieves helmet kit cabling
- Removable for helmet cleaning
- Easily transferable
Expand your two-person intercom system to 4 persons with this H22 Ultimate Headset expansion pack.
This combines (2) H22 Ultimate over-the-head headsets and (2) 16' offroad cables.
Expand your two-person intercom system to 4 persons with this helmet kit expansion pack.
This combines (2) helmet kits and (2) 16' offroad cables.
Click Here for Easy Install Kit
Fits: All Commander Models
- Easy to install nylon rear wind guard and vinyl window.
- Eliminates dust and wind, while offering a clear rear view.
- Made from water and UV resistant, heavy-duty, 1680 denier nylon.
- Installs with velcro
FITMENT
- Can-Am Commander 800 : 2011+
- Can-Am Commander 1000 : 2011+
- Can-Am Commander 800 Max : 2016+
- Can-Am Commander 1000 Max : 2014+
NOTE: Not compatible with Can-Am Sport Roof
FITS: Wildcat Trail and Sport 2014+
Made from 1/4" shatter proof polycarbonate.
Sliding vents allow for easy airflow adjustments.
Stainless steel hardware included for easy installation.
Sold as a Pair
Aluminum Clamp
Stainless Steel Hardware
Mount Lights and Other Accessories
Pivots to allow custom fit.
Fits: All 2015+ RZR 900 Models, two seater
- Integrated solidly mounted rear bumper to protect your valuable investment.
- Adds an upper rack for more storage.(Rack measures 26 3/4"x16")
- Rugged spare tire holder for those on-the-trail flats.
- Secure frame and cage mounted design.
- Adds a sporty full cage look.
- Integrated solidly mounted rear bumper to protect your valuable investment.
- Adds an upper rack for more storage.(Rack measures 26 3/4"x16")
- Rugged spare tire holder for those on-the-trail flats.
- Secure frame and cage mounted design.
- Adds a sporty full cage look.
Fits: All RZR 1000 XP 2014-2018
- This skid plate features unbreakable 1/2" thick UHMW.
- It allows your RZR to glide over obstacles instead of getting hung up (like aluminum).
- It offers front-to-back and side-to-side coverage.
- It uses countersunk hardware.
- It is much quieter than aluminum skid plates.
- It offers extended gas tank protection.
- Features unbreakable 3/8" thick UHMW.
- It allows your UTV to glide over obstacles instead of getting hung up (like aluminum).
- It offers front-to-back and side-to-side coverage.
- The supplied hardware is countersunk.
- It re-uses some factory hardware.
- It is much quieter than aluminum skid plates.
- It offers extended gas tank protection.
- Innovative mounting brackets reduce drilling into frame for easier install. (No drilling into round frame tubes.)
- May not work with some rock sliders.
Fits: All RZR 800 two seaters
- Features unbreakable 3/8" thick UHMW.
- It allows your UTV to glide over obstacles instead of getting hung up (like aluminum).
- It offers front-to-back and side-to-side coverage.
- The supplied hardware is countersunk.
- It re-uses some factory hardware.
- It is much quieter than aluminum skid plates.
- It offers extended gas tank protection.
