Side by Side Outlet Parts and Accessories

Fits the Honda Pioneer 1000 only.

A heat reflective under seat cover made of water-repellent outer fabric, padded and lined with Next Gen Heat Reflive material that deflects 95% of heat that comes from under the seats. Attaches easily under both seat with 5 cutouts for seatbelt strappings.

Made in USA.

Easy install with Screws (provided). Built with reinforced plastic back wall, water-repellent material and heavy-duty hardware. Attaches front to back of the manufacturers plastic roof using the existing roof nipples (drilling required) and the pre-set holes on the console. It is made with 4 separate compartments.

Made in the USA.

Oil Catch Can Reservoir Tank Kit

with 3/8" NBR Fuel Line

Aluminum

Black

300ml

Replaces OE 707800371 

• Clamp on mounting for positive seal - Ends leaking/dust ingress around the seal.
• 47% Increase in dust holding over the OEM filter - Maximum power and extended service intervals
• 99.992 efficiency - Unmatched on ISO fine dust - Keeps the finest dust and silt out of your engine!
• Washable and Reusable - Super-tough, synthetic hybrid fiber structure specifically designed for a simple maintenance routine using compressed air or vacuum.  Wash when needed. Last's for years, saving you money after a two uses!
• No Oiling - Just clean it, let it dry and roll out!
• Great for Off-Road, Sand, Trail Riding or Anywhere you ride your Can Am!

OEM Injector Cap Replacements for CFMoto UTVs.

Flap Kit Contents:

• Rubber Flap
• Metal Hold down Bar
• Installation Hardware

Details

PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System

Snow doesn't stand a chance against DENALI Pro UTV Snow Plows. Designed in the USA, these heavy duty, County-style 12-gauge steel UTV plow blades make quick work of powder and wet snow. The center mounted design disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. The plow kit includes a reversible wear bar, rubber flap, and skid feet to protect the blade from wear and tear. Dual-layer powder & Polyester paint coat boosts corrosion protection and UV resistance, keeping you plowing for seasons to come.

Please Note:All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, VIPER Max, or VIPER Midnight winch with an automatic brake.

Kit Contents:

• UTV Snow Plow Blade - County / DOT Style
• UTV Pushtubes
• One (1) Reversible Wearbar
• Rubber Flap
• Rubber Flap Stabilizer Bar
• Skid Feet
• Plow Markers
• Plow Mount (add year, make, & model in notes section at checkout)
• Installation Hardware and Instructions

Blade Features:

• County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
• Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
• Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
• High strength, high yield 3/16 thick Grade 50 steel wear bar
• Angled Blade : 16 on the low side; 23 on the high side
• Rubber flap & stabilizer bar with rubber flap
• Height AND angle adjustable steel skid feet
• 3 Year Warranty
• Made in the USA

Pushtube Features:

• PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
• Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
• Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
• Simple detachment system with the pull of a pin
• Structural tube steel cross bar for added lateral rigidity
• Quick release pins included
• 13.5 inches center to center for plow mount tabs
• Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
• Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)
• Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

Optional Hydroturn Features:

• PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
• Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
• Change the blade angle while driving; full radius turn in just 10 seconds
• Heavy duty chrome plated ¾″ cylinder shaft
• No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
• Wire harness utilizes weatherproof connectors

Optional Plow Pulley Fairlead Features:

• • Roller
    •      Replaces the winch fairlead during the plow season
    •      For use with Steel AND Synthetic cables
    •      Curved cable groove helps eliminate flattening and breaking of cable
    •      Bolt Patterns:
    •         Standard Spool: 3″ x 4.875″
    •         Wide Spool: 3" x 6.67″

• • Sheave
    •      Includes pulley, 1/4″ clevis hook and nylon strap
    •      Allows greater precision when raising/lowering plow blade and increases the angle of pull

• Cable
  •      12′ length, 1/4″ diameter
  •      Single braid, dyneema rope with galvanized steel thimble/eyelet

The Turbo Maverick has a decent all around clutch calibration if just trail riding with stock tires. It can, however, quickly develop belt heat issues in high load situations like larger tires and soft terrain. This is primarily a kit developed to help recover power losses and belt performance when using oversized tires on the two seat version* of the Maverick Turbo. The kit does, however have settings for stock tires for those that use the vehicle in soft terrain or switch tires seasonally, etc.

This one clutch tuning package can be set up to optimize CVT calibration for different tire sizes and applications. This kit includes adjustable mass flyweights for more flexible tuning options. A new case-specific flyweight was built for this application, designed to work with the other parts provided in the kit. Includes “set-up manual” as well as clutching overview for this model.

Features: -Allows you to change the clutch weights easily with clutch in car. -Primary clutch removal/Install. -Dissemble/assemble primary clutch for service or to modify. -Remove secondary clutch. -Dissemble secondary clutch for service/modify.

• Made of multi-bend aluminum sheet for style and weight savings
• Carefully contoured to your machine's shape for a rugged exterior look
• Smooth over tube construction
• Doors open suicide style
• Easy installation for a tight and rattle free fit
• Made with a heavy-duty steel frame form ultimate durability

Can-Am Commander

Can-Am Commander 2021+

Can-Am Commander Max - 2021+