Side by Side Outlet Parts and Accessories

Set Includes upper and lower bags, both sides!

Upper bags built with reinforced plastic back wall, water-repellent material and heavy-duty hardware. Designed to fit securely onto the RZR door frame utilizing the existing door bolts. Made with a shoulder and a knee cushion pads that are 1.5 inches thick for extra protection. The Lower bags are built with reinforced plastic back wall for stability, it has a large main zipper pocket with additional storage inside. Made of water-repellent material and heavy-duty hardware

Built with reinforced plactic back wall, water-repellent material and heavy-duty hardware. Designed to fit securely onto the RZR door frame utilizing the existing door bolts. Made with a shoulder and a knee cushion pads that are 1.5 inches thick for extra protection. These are made specifically for driver and passenger door so you must specify when ordering. Made in USA.

Built with reinforced plactic back wall for stability, it has a large main zipper pocket with additional storage inside. Made of water-repellent material and heavy-duty hardware. Designed to fit securely onto the RZR door frame utilizing the existing door bolts. These are made specificaly for driver and passenger door so you must specify when ordering.  Made in USA!

A 6-pocket organizer to fit overhead attaching securely to the frame with straps and velcro. Built with water-repellent material and reinforced plastic for stability. Available in black only. Made in USA.

An insulated and well padded gun pack that attaches easily and securely to the frame. There are two large front pockets with zipper and velcro closures. Made with dense foam and plastic for stability. It is accessible from either end and is made of water-repellent materials. It is designed to fit varying lengths of shotgun or rifle. Best suited for a single firearm. Made in USA

An insulated and well padded gun pack that attaches easily and securely to the frame. There are two large front pockets with zipper and velcro closures. Made with dense foam and plastic for stability. It is accessible from either end and is made of water-repellent materials. It is designed to fit varying lengths of shotgun or rifle. Best suited for a single firearm.

TRUNK CARGO CASE- No zipper on the main compartment as it secures closed with a large weather-flap and buckle closures. It is lined and padded and has reinforced plastic walls with adjustable dividers inside. This bag measures 37"W (at front) and 40"W at back, 12"H and 6"D. Available in camouflage or black

n insulated and well padded gun pack that attaches easily and securely to the frame. There are two large front pockets with zipper and velcro closures. Made with dense foam and plastic for stability. It is accessible from either end and is made of water-repellent materials. It is designed to fit varying lengths of shotgun or rifle. Best suited for a single firearm.  MADE IN USA!

CAN AM CENTER CONSOLE HEAT SHIELD COVER for 2-Seater only!... w/ Removable Cup Insert for Easy Cleanup. Built with Next Gen Heat Reflective material- 99.0% Radiant Reflectivity! Easy install seatbelt slots. A heat reflective console cover made of water-repellent outer fabric, padded and lined with Next Gen Heat Reflective material. Attaches easily to the center console with velcro and grommets that utilize the existing console screws. The cup holder insert is easily removed for quick cleanup.   Made in USA.

This bracket allows you to run a Group ETX30LA Battery VS the standard ETX20L in your Can Am Maverick Trail or Sport!  Bracket is made from steel, and then powdercoated black.  OEM is Steel and black.  BLEMISHED has cosmetic issues but functions well - our fab department made a mistake on a few.

We have done the testing, and have logged the results.  This is the absolute BEST combo of parts to get that 2015+ RZR 900 to perform at it's best!  We have included everything in one box at a reduced price point!  Whether you are adding bigger tires, or just want a little more power in a specific power range, this is the best combo available!  Read further details below!

Perfect bag to contain the belt and the tools needed to change it!  Grab and go, get back on the road!

FITMENT

We are the largest distributor besides Hunterworks themselves.  Buy direct from us and save VS our eBay or Amazon stores, which we have to pay a portion of our profits to.  Support small business and buy direct below!

IN STOCK, READY TO SHIP

• 2015-2021 RZR 900 All Models,
• 2013-2019 Ranger 900 All models
• 2016-21 General 1000 All Models
• 2020 Generals except the new XP, it uses the STD Belt HW-921K
• 2017 Ranger XP 1000 All models
• 2018 Ranger Crew XP1000 (not same as 2018 Ranger 1000 3 seater)

Fitment

• 2017-2021 Can-Am Defender H8 and HD10

Best BRP Belt on the Market!!!

• Made in the USA - Hunterworks belts are Made in the USA. These belts are engineered to meet or exceed OE standards.
• Long Service Life - Made from a proprietary construction application, these drop-in belts require no clutching adjustments and have a minimal stretch effect under load for consistent shifting
• 1% Warranty Rate - These belts can sport the title of having a less than 1% failure rate! That's because these belts are purpose-built to handle the unique demands of harsh CVT applications
• Huge Compatibility - Don't quote us, but BRP uses the same dimensioned belt on a ton of vehicles. It pretty much covers everything from a 800cc UTV to the Maverick X3. So what HW did was take BRP's OE dimensions, use their proven construction technique and make these belts.
• Common Sense 1 Year Warranty - We'll get down to what the warranty covers; As long as you didn't purposely try to blow your belt up, install it on the wrong UTV, install it incorrectly or have other clutch issues, we will replace the belt with a new belt. In the end these belts cost less money than the OEM belts and have a warranty where the OEM does not.

Fitment

• 2017-2021 Can-Am Maverick Trail and sport models 800/1000

Best BRP Belt on the Market!!!

• Made in the USA - Hunterworks belts are Made in the USA. These belts are engineered to meet or exceed OE standards.
• Long Service Life - Made from a proprietary construction application, these drop-in belts require no clutching adjustments and have a minimal stretch effect under load for consistent shifting
• 1% Warranty Rate - These belts can sport the title of having a less than 1% failure rate! That's because these belts are purpose-built to handle the unique demands of harsh CVT applications
• Huge Compatibility - Don't quote us, but BRP uses the same dimensioned belt on a ton of vehicles. It pretty much covers everything from a 800cc UTV to the Maverick X3. So what HW did was take BRP's OE dimensions, use their proven construction technique and make these belts.
• Common Sense 1 Year Warranty - We'll get down to what the warranty covers; As long as you didn't purposely try to blow your belt up, install it on the wrong UTV, install it incorrectly or have other clutch issues, Hunterworks will replace the belt with a new belt if oyu contact them directly. In the end these belts cost less money than the OEM belts and have a warranty where the OEM does not.

Fitment

• 2017-2022 Can-Am Maverick X3 | X3 Max 

Best BRP Belt on the Market!!!

• Made in the USA - Hunterworks belts are Made in the USA. These belts are engineered to meet or exceed OE standards.
• Long Service Life - Made from a proprietary construction application, these drop-in belts require no clutching adjustments and have a minimal stretch effect under load for consistent shifting
• 1% Warranty Rate - These belts can sport the title of having a less than 1% failure rate! That's because these belts are purpose-built to handle the unique demands of harsh CVT applications
• Huge Compatibility - Don't quote us, but BRP uses the same dimensioned belt on a ton of vehicles. It pretty much covers everything from a 800cc UTV to the Maverick X3. So what HW did was take BRP's OE dimensions, use their proven construction technique and make these belts.
• Common Sense 1 Year Warranty - We'll get down to what the warranty covers; As long as you didn't purposely try to blow your belt up, install it on the wrong UTV, install it incorrectly or have other clutch issues, we will replace the belt with a new belt. In the end these belts cost less money than the OEM belts and have a warranty trough Hunterworks where the OEM does not.

• Made in the USA
• Compares to the S Dimensioned Belt 3211162
• Engineered for toughness and strength
• Proprietary construction
• Fits all 2008-14 RZR 800 All Models
• Fits All 2010-2014 Ranger 800 All Models

• MOUNT YOUR FLAG - Quick release flag mounting kit fits your Polaris RANGER or GENERAL by GripPRO ATV Anchors. Fits 1-7/16" Lock & Ride holes.
• NO TOOLS NEEDED - Super tight grip is achieved with our Best-Selling tie down anchor.
• FAST & EASY - Have your flag on or off in seconds. DOES NOT FIT RZR with 1" hole - see our RZR-fitting kits.
• VERSATILE - Mount in any of the rear platform / bed holes. Move as desired.
• DURABLE - Made of Stainless Steel components in the USA! LIFETIME WARRANTY.

• MOUNT YOUR FLAG - Quick release flag mounting kit fits your Polaris RZR, Sportsman or ACE by GripPRO ATV Anchors. Fits 1" Lock & Ride holes.
• NO TOOLS NEEDED - Super tight grip is achieved with our Best-Selling tie down anchor.
• FAST & EASY - Have your flag on or off in seconds. DOES NOT FIT RANGER with 1-7/16" holes. See our Ranger kit.
• VERSATILE - Mount in any of the rear platform / bed holes.
• DURABLE - Made of Stainless Steel components in the USA! LIFETIME WARRANTY.

FEATURES RIBBED EPDM rubber anchor expands evenly and holds better than other style anchors. MOUNTS quickly and easily on your Polaris RZR (Razor), Sportsman or Ace ATV with 1 inch hole in the cargo rack or bed. HAUL all your hunting, fishing, recreational or work gear securely. MADE with American Made products, 316 Stainless Steel and Heavy Zinc plated hardware for the ultimate in corrosion resistance. LIFETIME WARRANTY against failure and Hand-assembled and packaged in the USA! EACH set includes: Four (4): 5/16" x 2 3/4" long SS Bolt with 1-3/4" diameter Star Knob Fasteners made by GripPRO ATV Anchors.

Please verify your ATV or UTV has a 1" hole before placing order. See our other products for expansion anchors that fit the Ranger or General.

FEATURES RIBBED EPDM rubber anchor expands evenly and holds much better than other anchors. MOUNTS quickly and easily on your Polaris Ranger or General with 1-7/16" inch hole in the cargo rack or bed. HAUL all your hunting, fishing, recreational or work gear securely. MADE with American Made products, 316 Stainless Steel and Heavy Zinc plated hardware for the ultimate in corrosion resistance. LIFETIME WARRANTY against failure and Hand-assembled and Packaged in the USA! EACH set includes: Four (4): 5/16" x 3 1/4" Eye Bolt Fasteners made by GripPRO ATV Anchors.

Please verify your ATV or UTV has a 1 7/16" hole before placing order. See our other products for expansion anchors that fit other models with smaller holes.

FEATURES RIBBED EPDM rubber anchor expands evenly and holds much better than other anchors. MOUNTS quickly and easily on your Polaris Ranger or General with 1-7/16" inch hole in the cargo rack or bed. HAUL all your hunting, fishing, recreational or work gear securely. MADE with American Made products, 316 Stainless Steel and Heavy Zinc plated hardware for the ultimate in corrosion resistance. LIFETIME WARRANTY against failure and Hand-assembled and Packaged in the USA! EACH set includes: Four (4): 5/16" x 3 1/4" Eye Bolt Fasteners made by GripPRO ATV Anchors.

Please verify your ATV or UTV has a 1 7/16" hole before placing order. See our other products for expansion anchors that fit other models with smaller holes.