Side by Side Outlet Parts and Accessories

Made right here in Idaho Falls!  These are great magazines to show your support of SbSO and the Second Amendment!

THIS PRODUCT IS ILLEGAL IN THE FOLLOWING AREAS and we will NOT ship there:

Fitment:

• 2017-2018 Can-Am Maverick X3, every model
• 2013-2018  Can-Am  Maverick, every model
• 2011-2018  Can-Am  Commander, every model
• 2008-2018  Can-Am  Renegade, every model
• 2006-2018  Can-Am  Outlander, every model
• All Years - Can-Am Defender, every model
• 2018  Can-Am  Traxter, every model
• ALL Can-Am UTV's and ATV's from 2007 to 2020 (not 2018's with Smart Lok, or 2020+ European Models with Brake Traction Control, "BTC")

Applicability: 2014+ Polaris RZR (excludes Polaris RZR RS1, RZR 170 and RZR PRO XP models)

Features:

• Designed to be a replacement for your plastic seat base
• Compatible with stock RZR slider
• Allows you to use your 570/800/XP900 seats in a newer XP 1000 or S 900 and vice versa
• Includes seat bases and latch housing (no latch spring or handle)
• Weight: 9 lbs
• Dimensions per mount: 15 in x 12 in x 4 in

• Direct replacement for the OEM Polaris plastic valve
• Tested to 500+ horsepower
• Billet anodized aluminum construction with high temperature sealing rings
• Does not stick like the OEM valve is prone to
• Has the “Blow Off Valve” sound that turbo customers crave
• Includes a pre filter to keep dirt/sand out of the valve

Adding harnesses to any recreational vehicle gives the occupants the opportunity to focus on the ride, not on holding themselves in place, but when the factory seats are taller than the person sitting in it, the harness is less effective and in some cases uncomfortable. The DragonFire Harness Pass-Through Bezel is designed to prevent harnesses from falling off a riders shoulders and allow harnesses to be placed lower down for better fitment. Take the focus off your harnesses and enjoy your ride.
• Designed for Polaris OEM Seats.
• Easy to install.
• Provides clean and finished look.
• Allows for use of 4 or 5 point harnesses.

The A.T. Hotbox is plumbed into the motor’s cooling system.  As the motor runs, it heats the element inside to temperatures hot enough to warm and even cook food safely. Our specially designed mounting brackets make it easy to safely and securely fasten your A.T. Hotbox. For other models, use the four 1/4 20 rivnuts already secured in the bottom of the A.T. Hotbox.

Nearly any type of cooking product you have in your kitchen drawer can be used in the A.T. Hotbox. There’s no need for special cookware for the hotbox to warm or cook food. Recommended to not cook food directly in pan – sandwich bags (freezer bags are suggested as they are thicker), Tupperware containers, parchment paper (wrapping bread to prevent sogginess), and aluminum foil (do not wrap food directly – wrap around parchment paper).

Average cook/heating time is about 2 – 2 1/2 hours. Cook raw meat such as chicken breast, stew meat, prime rib roast, boneless pork spare ribs, new york steak and taco meat. Warm up left overs, corndogs, brats, lasagna, hot chocolate, burritos – almost any item you can pull from the grocery store shelf that you would heat up or cook at home.

Vehicle Specific Mounts sold separately - please call.

Please note: Bimini Roof with sun visor or Sport Roof needed for installation (sold separately)

• Weather-resistant bags
• Hold your gear safely and securely while riding
• Includes 2 overhead soft bags mounted on a tubular frame that sits between cage and roof
• 2.4 Gal (9L) total capacity
• Sold as pair

LiteSPOTs LED spotlights were designed to be a low profile under chassis light, a rock light.

LiteSPOTs are 3 high power LEDs embedded in a clear resin housing to deliver a water and corrosion proof package that delivers a wide beam of bright light, with a 4-6 foot focal range. They are not designed as backup or driving lamps. The LiteSPOTs include a neodymium magnet encased in the resin, providing for easy “stick on” mounting to any metallic surface. There is also a thru hole drilled in each one and a supplied self tapping screw to allow for installation on non-ferrous surfaces.

Each LiteSPOT measures 1 3/8″ in diameter and 5/8″ thick. Each LiteSPOT comes with 24″ of 2 conductor 22 gauge wire attached and each unit draws approximately 120 milliamps.

This Slip-On Muffler for the Polaris XP 900 RZR delivers an additional 4.2 horsepower with well over double the air flow compared to the stock silencer. This translates into a substantial performance increase and better throttle response. Its stainless steel construction provides excellent strength and durability. The sound level measures 95.5 DB (@ 4200 RPM) using the SAE J1287 sound test. It also features a spark arrestor that can be added for trail use.

Fuel controller not required.

This is the same muffler found on the 2013 Polaris Jagged X.

CLEARANCE!  While supplies last!

Fits any RZR 570/800/900XP (not trail).

Looking for graphics to complete the look on your 2020 RZR® Pro XP and color ways for your Pro Armor® RZR® Pro XP Doors and side panels. Look no further to a color and theme matched white/blue graphics kit. Consists of a white/blue color scheme this graphic kit will match the colors on your white/blue RZR® Pro XP. Made from 3M brand vinyl and backing for a strong application and withstand elements and fade.

This Graphic Kit only fits Pro Armor "Pro XP" doors 2020 model vehicle found by clicking HERE.

Pro Armor All Aluminum doors are an industry standard. These doors are direct bolt on to your Pro XP and install in minutes. The bolt on door utilizes the OEM Paddle latch and there is absolutely no rattle with these doors. Installation is easy and the doors allow for plenty of adjustment. Our doors feature a reverse hinge system which makes getting in and out of your Pro XP much easier. The doors open almost a full 180. Doors offered in all 2020 Pro XP Polaris signature colors.

Matching graphics kit as pictured available, click HERE.

P199D003 Doors INSTRUCTIONS

Features:

• Weather-resistant semi-rigid bag, holds your gear safely and securely while riding.
• Bag attaches in unused space between the seats to increase your vehicle's cargo capacity.
• 2.8 Gal (10.5L) capacity.
• Not compatible with Aftermarket Seats

Fitment:

• 2018+ Maverick Trail, Maverick Sport, Maverick Sport Max
• 2021+ Commander all models

These are made from 1/4 Laminated Safety Glass and a steel frame.  The bottom portion will flip up and forward in the middle to allow airflow underneath.  Fits any maverick trail or sport model.

INTRODUCING THE GUN DEFENDER

• Injection molded design offers superior strength as well as high water and dust resistance
• Defender design accommodates standard length and longer rifle barrels
• Additional width in the right places eliminates interference with bolts and target style turrets
• Fully customizable hybrid interior structure ensures a secure hold and protection for any gun
• Accommodates rifles up to 53" in length
• Accommodates turret style scopes up to 50mm
• 1.25” receiver slider makes for easy on, and easy off of the machine
• ATV Mount sold HERE
• UTV Bed Mount sold HERE
• Hitch Mount sold HERE

Our Soft Door Kit is made from the finest marine grade material on the market.  Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl.

Fits in any RZR 2014+ (900s, 1000s, Turbos). Made for two Yeti cups but works with many large+ plastic cups from most gas stations.  If needed, you can buy the can inserts as well.

Flex Fit Hat that shows your support for Side by Side Outlet.  Ride in style!  Order now, limited to what's on hand!

New colors for 2020!  These are limited to what we have on hand!

• Record Tracks
• GPX file import and export
• Drop customized waypoints and set waypoints as destination.
• Glove friendly 4" touch-screen
• Pre-loaded topo maps with layers
• Color Display
• Plan & record entire trail systems
• Tachometer
• Bluetooth phone and headset interaction
• Lap Timer
• Track up to 20 buddies (Cellular service not required)
• Emergency beacon
• GPS satellites tracker

Details

The Tusk UTV Seat Heater is the ideal accessory to add to your machine when riding in cold weather conditions. The seat heater panel fits under your seat cover and connects to your battery for easy installation. This heater includes a switch with High and Low heat settings to make it easy to set your comfort level. It would be a great addition to your cold weather rides and plowing snow with your UTV. Works on most UTV applications. When in need of parts and accessories for your dirt bike, ATV, or UTV, think TUSK!
• Tusk UTV Seat Heater is perfect for cold weather riding conditions.
• Switch includes High and Low heat settings for the ideal comfort level.
• Easily installs under the seat cover and connects to the battery of the machine.
• Works great for most UTV applications.
• 50 Watts
• Max Temp of 158 F (70C).

• Some drilling is required to install the switch.
• Sold Per Seat.
• Dimensions: 10.75"x18.5

Use this handy wire tap to get power from your brake lights!  Will give you a keyed power, ground, and then a brake light power.  Us it to run whips, a third brake light, license plate light, or anything else you can think of.  Simply tape off or cut the wire you don't need from this handy harness.  Check picture carefully for pin configuration, some models MAY vary.  Fits most Poalris RZR and Ranger Models 14+, may fit others.

Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit

Made to order: Estimated 1 week build time

Made to order: 1 week build time