Side by Side Outlet Parts and Accessories
Fits all years CF800.
- 4 quick-release hold downs allow for easy and quick removal for servicing
- seal around lid to keep out moisture and dirt
- 177L capacity
- locking latches to secure items inside
- On the top of the box, there is a special site for 2 branded 5-liter CFMOTO jerry cans.
- Upgraded heavy duty hinges easily withstand the weight of two fuel cans.
Spare cargo space to carrier an extra tire/wheel, gas cans, camping supplies, etc. Works well when paired with THIS box.
DragonFire UTV Harness is designed with smaller riders in mind. Rated for up to 120 lbs, DragonFire's Youth UTV Harness allows smaller riders added adjustablity due to its scaled down smaller profile on the length of the shoulder pads and straps..
Note: Additional installation hardware and/or moutning components may be required depending on model.
Add a SSV Works MRB3 Bluetooth Media Controller to your […]
- Manufactured from .095" Steel
- Fits up to 32" Tire
- 2" Nylon Strap and Ratchet
- 11" clearance under tire rack
Spare Tire Rack Fits:
- (19-21) Yamaha® YXZ 1000
Current Production: kept in stock
Features:
- Built from .095" steel tubing
- Increased protection to the front end
Fits:
- (2016-2020) Yamaha YXZ 1000R, SS, SE
Headers designed for the maximum power output Single Lambda sensor comes standard Constructed from Aerospace grade hi heat Titanium alloys Advanced welding process showcases laser perfection welds Long Tapers with Precision fitment and "butt" welds Spigots designed to allow the headers to float free without leaks Flanges are made from 7075 hard anodized aluminum. Built to last!
Exhaust System Saves 14.7 lbs. over stock setup. 83 db at Idle / 96.5 db at 4000 rpm Fitment: Yamaha YXZ 1000r (All) 2016 - 2019
Current Production: Built in 2-4 Weeks
Features:
- Built from .095” wall, heavy-duty steel tubing.
- Easily mounts to the frame.
- Provides extra strength and protection.
- Works with stock and HMF™ exhausts.
Fits: (19+) Yamaha Wolverine X2
Plug & Play Easy Install Fits 2017-2019 Yamaha Wolverine Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch*** Rear Power Out for optional license plate light** Made in the USA!
Yamaha Wolverine RMAX Inferno Cab Heater Features:
- Direct-fit to your machine and hidden from sight.
- Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, ductwork & wiring.
- SPAL multi-speed blower. SPAL is the world leader in high-performance fans and blowers, ensuring performance with longevity that is second to none. The fan has a 3-year warranty.
- Includes the OEM thin-line rectangular defrost vents.
- The custom multi-speed switch fits right into factory dash holes.
- 18,000 BTU heater.
Fitment Note: Does not fit 2019 and 2020 Wolverine or Wolverine R-Spec
Fits Yamaha Wolverine (2016-2018)
Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Heater kit has 6 Vents and fits completely under the hood. This kit comes with a compact yet powerful heater with a three speed fan which will deliver heat from the 14,600 BTU* Compact Heater Unit. Adjustable louvers direct the heat were you need it. Two 2" vents mount on top of the dash to defrost the windshield, two 2” vents mount in the center dash panel and two 3” vents mount in the lower dash area. Kit is also available with optional in dash Heat Control (shown in dash vent picture). A unique feature of our kit is that the heater intake comes from inside the cab where the air is cleaner and warmer. Warmer air means more available heat for you inside the cab. Kits are supplied with our custom CNC made alloy Y connectors and fittings that connect directly to the engines cooling system or for faster heat use our optional MaxStat. Kits also include custom CNC laser cut mounting brackets, heater hoses and duct hoses, hose clamps, new and improved vents, hole saws (for the heater hoses and vents), grommets, switch, wiring loom and terminals, templates, your specific mounting bracket with hardware, and instructions. Kit is also available with optional in dash Heat Control. Use our MaxStat option for better performance, faster and more heat from your heater.
Fits Yamaha Viking (2014-2021)
Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to directs the heat were you need it and a 2” vent defrost to keep your windshield clear. The heater features a three speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engines cooling system. Comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more. Use our MaxStat option for better performance, faster and more heat from your heater.
Each Axle Features:
- Extended length for Cognito Long Travel
- High strength 300M Steel material
- Installs in OE CV joints
- Limited Manufacturer's warranty
- Made in the USA
Each Axle Features:
- Extended length for Cognito Long Travel
- High strength 300M Steel material
- Installs in OE CV joints
- Limited Manufacturer’s warranty
- Made in the USA
Fits Yamaha Rhino (2006-2013)
Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to direct the heat were you need it and an optional 3” vent defrost kit is available to keep your windshield clear. The heater features a three speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engines cooling system. Comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more. Use our MaxStat option for better performance, faster and more heat from your heater.
- Unsurpassed in airflow, stopping dirt and overall performance
- Two-stage air filters come apart for maximum airflow and ultimate cleaning
- Most filters feature the Ultra Seal grease groove on the sealing surface
- Each fits in stock airbox exactly like OEM filter
- Clean easily with grease-cutting dishwashing detergent; just clean, oil and reuse indefinitely
- See Lubes section for cleaner and service kit
- Made in the U.S.A.
2006-2009 Yamaha YXR 450F Rhino 4x4 - - 2004-2007 Yamaha YXR 660F Rhino 4x4 
See pics for FULL fitment notes - not all belt types are interchangeable!
See pics for FULL fitment notes - not all belt types are interchangeable!
Every Demon Powersports Xtreme Duty Axle Assembly Features:
- CV Joint, Shaft and Internal Components (Cage and Race) Made up of 4340 Chromoly Steel
- Dual Heat-Treated Components
- Double Offset Joint (DOJ) Designed to Reduce Heat during High-Speed Desert Riding
- Wider Swing Angles up to 45 Degrees
- Precision CNC Machined
- High Quality Lithium Based Molybdenum Grease with a High Drop Point
- Backed by a 24 - Month Manufacturer Limited Warranty
Every Demon Powersports Xtreme Duty Axle Assembly Features:
- CV Joint, Shaft and Internal Components (Cage and Race) Made up of 4340 Chromoly Steel
- Dual Heat-Treated Components
- Double Offset Joint (DOJ) Designed to Reduce Heat during High-Speed Desert Riding
- Wider Swing Angles up to 45 Degrees
- Precision CNC Machined
- High Quality Lithium Based Molybdenum Grease with a High Drop Point
- Backed by a 24 - Month Manufacturer Limited Warranty
Every Demon Powersports Heavy Duty Axle Assembly Features:
- Cage Made Up of 4340 Chromoly Material
- Thermoplastic Polyester Elastomer (TPEE) Boots
- 15 percent - 20 percent Increase in Diameter Compared to OEM Axles
- 10 percent - 15 percent Increase in CV Joint Size Compared to Regular Joints
- Wider Articulation Angles
- Boots Packed with High Load Molybdenum Grease
- Precision CNC Machined
- Direct OEM Replacement
- Backed by a 12 - Month Manufacturer Limited Warranty
Every Demon Powersports Heavy Duty Axle Assembly Features:
- Cage Made Up of 4340 Chromoly Material
- Thermoplastic Polyester Elastomer (TPEE) Boots
- 15 percent - 20 percent Increase in Diameter Compared to OEM Axles
- 10 percent - 15 percent Increase in CV Joint Size Compared to Regular Joints
- Wider Articulation Angles
- Boots Packed with High Load Molybdenum Grease
- Precision CNC Machined
- Direct OEM Replacement
- Backed by a 12 - Month Manufacturer Limited Warranty
We like this winch plate because it lets you choose either standard or wide spool winches. Replaces stock bulkhead and front deflector.
Adapts any Can Am X3 or Commander Model to any aftermarket wheel with 6 bolts that are spaced 2.75" or 2.91"
- Built specifically for a 10" or 12" LED light bar. see options by clicking HERE or scroll down below
- Plasma cut from 3/16" steel.
- Acid dipped and sandblasted before applying a high quality powdercoat finish
- Installs in minutes using OEM hardware.
- No drilling or cutting.
Strap in and hold on tight. With the Launch Control Module for your Can-Am Maverick X3, you’ll beat the competition off the line with built-in two-step and the ability to build boost off launch.
Dynojet’s Launch Control Module (a true two-step) easily connects to the Can-Am Maverick X3, delivering a surge of power when you first drop the hammer. This push button control module allows for wide-open throttle during launch — with no torque limitations. Requires custom tuning.
The Launch Control Module is the ideal power starter for Can-Am, fitting Maverick X3 models from 2017-2020.
This kit includes everything you need for installation, allowing you to bring the heat right out of the gate. Installation is easy, featuring plug-and-play design that connects to the OEM wiring harness — no cutting or splicing required.
Through Power Core Software, you’ll have the ability to adjust launch RPM, though we recommend setting the launch RPM to match the primary clutch engagement RPM to avoid potential belt or clutch damage.
The X3 Front Gusset Kit is a must for hard riders who want to keep their pride and joy machines in perfect working order. The X3 has what many people call a (floating front end). The front of the machine ahead of the A-Arms is only supported by the radiator. With our gusset kit the front end will be completely tied together and allow you to bring your machine to full potential.
This door bag platform comes with 4 pouches included in the loaded kit. Choose your flag color in the drop down option, one flag patch included.
Pouches included are:
1- Tear Away First Aid Pouch
2- Small Utility Pouch (w/ flag)
3- Multi-Purpose Utility Pouch
4-Your Choice (gun holster, radio pouch, or cell phone pouch)
- LIFETIME WARRANTY
- Fits Can-Am Maverick X3 front factory doors
- UV-treated, water-resistant TriMax® fabric with Fibertech “carbon-like” accents
- Reverse coil zippered single storage compartment
- Rubber coated oversized zip pullers operate easily with gloves
- Dimensions: 24”L x 9W x 2.5”D
- Holds 7 liters per side, sold as set
- X3 mount that mounts on the back b-pillar bolts.
- Black powder coating for corrosion resistance.
